PRODUCTS BY CATEGORY
Microscope
Laboratory Ovens
Incubators And Electronic Analytical Instruments
Fiber Glass Anatomical Biological & Zoological Models
Physics Instruments
Laboratory Glassware And Plasticware
Pharmacy Instruments
 

Our Sister Concern Website Microscopes Manufacturer.com

Our Clients
 

Laboratory Ovens Incubators And Electronic Analytical Instruments

Coslab India proud manufacturers suppliers and exporters of prestigious Laboratory Ovens, Incubators and Electronic Analytical Instruments. Some of other products includes Water Bath, Hot Plate, Heating Mantles, Magnetic Stirrer with Hot Plate, Centrifuge Round and Square and others

 

Laboratory Ovens Manufacturers Suppliers

COSLAB MODEL: CLE-101

HOT AIR OVEN UNIVERSAL MEMERT TYPE

Outside made of mild steel with powder coated paint. Inside made of anodised aluminium/stainless steel. The double walled door with asbestos gasket lining is fitted on heavy brass cast chromium plated hinges and has a chromium plated latch type lock. Temperature can be controlled from few degree above ambient to 250°C by thermostat. Heating elements are placed in the ribs at the bottom and sides. Built in L-Shape prismatic thermometer, with two shelves, works on 220/230V AC supply with or without air circulating fan.
Option : Electronic Digital Temperature controller cum indicator.

OVEN

 

 

 

Laboratory Incubators Suppliers Manufacturers

COSLAB MODEL: CLE-102

INCUBATOR (BECTERIOLOGICAL)

Outside made of mild steel with powder coated paint. Inside made of aluminium/stainless steel. The double walled door with asbestos gasket lining is fitted on heavy brass cast chromium plated hinges and has a chromium plated latch type lock. Temperature can be controlled from few degree above ambient to 80°C by thermostat. Heating elements are placed in the ribs at the bottom and sides. Built in L-Shape prismatic thermometer, with two shelves, works on 220/230V AC supply with or without air circulating fan.

Option : Electronic Digital Temperature controller cum indicator.

INCUBATOR

 

 

 

Laboratory Water Bath Suppliers Manufacturers

COSLAB MODEL: CLE-103

SEROLOGICAL WATER BATH

Outside made of mild steel with powder coated paint. Inside made of stainless steel. Temperature can be controlled from few degree above ambient to 65°C, without racks and thermometer, works on 220/230V AC. Available in different sizes.
Option : Electronic Digital Temperature controller cum indicator.

WATER BATH

 

 

 

COSLAB MODEL: CLE-104

RECTANGULAR WATER BATH (DOUBLE WALL)

Outside made of mild steel with powder coated paint. Double walled inside made of stainless steel. Temperature is controlled by thermostat from ambient temperature to 80°C.Top of the bath and concentric rings are made of highly polished stainless steel. Available in three sizes viz. 6/12/18 holes respectively of 75mm dia.

 

 

COSLAB MODEL: CLE-105

WATER BATH RECTANGULAR (SINGLE WALL)

Made of stainless steel sheet. Complete bath and concentric rings are made of highly polished stainless steel rings. Heating elements have an automatic cutoff device when bath gets dry. It does not have thermostat. Electrically operated 220/230V AC. Available in three sizes 6/12/18 holes respectively of 75mm dia.

 

 

COSLAB MODEL: CLE-106

TISSUE FLOATING WATER BATH

Double walled inside made of black anodised aluminium and outside made of mild steel sheet with powder coated paint. Thermostatic control from ambient temperature to 80°C complete with indicator. Wire and plug to work on 220/230V AC without thermometer. Available in three sizes.
Option : Electronic Digital Temperature controller cum indicator.

 

 

Laboratory Hot Plate Manufacturers Suppliers

COSLAB MODEL: CLE-107

HOT PLATE (ROUND)

Hot plate has the same construction and finish as the rectangular except that hot plate mounted on a thick mild steel sheet body has a smooth surface cast iron top of 20cm dia. Heated with an electrically operated element layed under the plate. A three step rotary switch works on 220/230V AC. The body is finished with powder coated paint. The hot plate has pilot lamp.
1. 20cm. round.
2. Rectangular in different sizes.
Option : Electronic Digital Temperature controller cum indicator.
Option : Energy Regulator

HOT PLATE

 

 

 

Heating Mantles Suppliers Manufacturers

 

HEATING MANTLES

 

 

 

Magnetic Stirrer with Hot Plates

COSLAB MODEL: CLE-108

MAGNETIC STIRRER

Magnetic stirrers are used in labs. They are available in two designs, with hot plate/without hot plate. The stirrer with a hot plate is made of metal sheet with stainless steel top which serves as a hot plate. Its stirring and heating units are fitted with an electronic regulator to control the speed of the stirrer. An energy regulator adjusts the heating of the hot plate. The apparatus works on 220/230V AC. It is finished with powder coated paint.

MAGNETIC STIRRER WITH HOT PLATE

 

 

 

Centrifuge Round

COSLAB MODEL: CLE-109

CENTRIFUGE (ROUND)

Medico centrifuge having better speeds and capacities fitted with motor for vibration free performance and 5 step regulator. Elegant finish with powder coated paint works on 220V/230V AC.
Option : Centrifuge machine available in different capacities.
Option : Doctor type Model also available.

CENTRIFUGE ROUND

 

 

 

Centrifuge Square

 

CENTRIFUGE SQUARE

 

COSLAB MODEL: CLE-110

WATER STILL (STAINLESS STEEL AUTOMATIC)

Water monitoring complete stainless steel body for pyrogen free distilled water. It is fitted with specially designed baffle which prevents water splashing over into the condenser, this steel is fitted with the best quality immersion heaters which has long life and can be replaced easily in the event of burn out. Automatically cut off device incase the still gets dry. It is also fitted with a water level over flow and inbuilt over flow system.

 

 

COSLAB MODEL: CLE-111

HEATING MANTLES

Body is made of aluminium with powder coated paint. The panel is provided with on-off switch, energy control knob, pilot lamp etc.
Provided with jointless hand knitted heating nets of glass yarn capable of withstanding high temperature upto 400°C. Single individual size upto 5 litres capacity containers are available.
Supplied complete with cord & plug to work on 220 V AC 50 Hz single pahse.
Single size Wattage
a) 50 ml. 60
b) 100 ml. 60
c) 250 ml. 150
d) 500 ml. 200
e) 1 lit. 300
f) 2 lit 450
g) 3 lit. 450
h) 5 lit. 600
Note :- Other sizes, capacities, multiple models and spare heating mantles can be offered on demand.

 

 

muffle furnace

COSLAB MODEL: CLE-112

MUFFLE FURNACE

Outer body is made of thick mild steel sheet. Working temperature 940°C. Temperature controlled by energy regulater with indicator. Pyrometer thermo-couple. Heating element made of kanthal wire. Special high temperature alloy wounded on the outer surface of working chamber to work on 220/230V AC.
Option : Electronic Digital Temperature Controller cum indicator.

 

 

COSLAB MODEL: CLE-113

MUFFLE FURNACE (INDUSTRIAL USE)
(GROOVED TYPE)


Outer body made of thick mild steel. Working temperature 1100°C. and maximum temperature 1150°C. Heating elements are fixed inside working chamber of refectory which have grooves. Heating elements are easily replaceable in any of the four sides. Available in different sizes.
Option : Electronic Digital Temperature Controller cum indicator.

 

 

COSLAB MODEL: CLE-114

VACUUM OVEN

Outer made of thick mild steel, with powder coated paint. Inside made of thick stainless steel. Temperature ranges from 50º to 230ºC ±2ºC thermostatically controlled capable with standing vacuum of 760mm with solid metallic casted door and glass window. Available in two sizes.
Option : Electronic Digital Temperature controller cum indicator.

 

 

Humidity Cabinet

COSLAB MODEL: CLE-115

HUMIDITY CHAMBER

The outer is made of mild steel, with powder coated paint. Inside stainless steel. The door has glass window. The temperature can be controlled from ambient to 60ºC ±1ºC. Built in L-shape prismatic thermometer. The humidity is controlled by humidity stat from atmospheric humidity to 90% ± 3%. Available in different sizes.
Option: Electronic Digital temperature controller cum indicator. Electronic Digital humidity controller cum indicator.

 

 

Laminar Air Flow

COSLAB MODEL: CLE-116

HORIZONTAL LAMINAR FLOW CABINET

Laminar cabinets are made of best quality board. The main function of Laminar cabinet has two times filteration of atmospheric air which is blown through HEPA FILTERS with balanced blower provides good amounts of air on full surface of HEPA FILTERS which rotates all air borne particles of size 0.3 Micron.
Available in four sizes.

 

 

B O D Incubator

COSLAB MODEL: CLE-117

B O D INCUBATOR

Onside made of mild steel with powder coated paint. Inside made of aluminium/stainless steel with 2/3 shelves. Inside acrylic glass door. Temperature is controlled with two thermostats and accessories to get temperature from 5º to 60º ±1º to work on 220/230V AC. Fitted with two air circulating fans.
Option : 1. Electronic Digital Temperature controller cum indicator.
2. 24 hrs timer.

   
Uv Vis Spectrophotometer

COSLAB MODEL CLEM -29

UV-VIS SPECTROPHOTOMETER

UV-visible spectrophotometer an analytical instrument commonly used in physico – chemical laboratories to make quantitative and qualitative analysis of specimen materials in the ultraviolet, visible spectral range finds much scope for its service in such fields as medicine, clinical examination, biochemistry, petro-chemical  industry, bio technology, Environmental protection and quality control. The technique has enjoyed a molecular biology and the need to quantify DNA and proteins. Here the simplicity of use, the nondestructive nature of the sampling and the cost effectiveness of the measurement has proved very beneficial in the modern laboratory.

 

FEATURES:

  • Covers 195 to 1000 nm
  • 4 Position Cuvette Holder
  • RS-232 C computer Interface
  • High wavelength Precision
  • Compact & Good Looking Shape

 

 

TECHNICAL SPECIFICATION:

 

Spectral

 

Wavelength

195 to 1000 nm

Spectral Band Width

2 nm

Accuracy

± 0.5 nm

Repeatability

± 0.3 nm

Resolution

0.1 nm

 

 

Photometric

 

Photometric Range

% T:0 to 100 %, Abs.: 0 to 1.999
Conc.: 0 to 1999, K-Factor : 0 to 1999

Accuracy

± 0.005 Abs at 1.0 Abs
± 0.010 Abs at 1.5 Abs

Stray Light

Less than 0.1 % at 320 nm

Readability

± 1 Count

Data Readout

Single Line LCD display

Key Board

4 Keys, Soft touch membrane type

Printer Interface

Printer interface for any centronics dot matrix printer

Serial Interface

RS 232 C Interface

Light Source

(a) Tungsten Halogen Lamp
(b) Deuterium Lamp (D2)

Detector

Wide range Silicon Photodition

Optics

Complete mirror optics with resolution
1200 groves / mm grating

Sample Holder

4 Position adjustable sample holder

Power

230 V ± 10 %, 50 Hz. AC

Dimensions

420 x 350 x 240 mm (Ixbxh) Approx

Weight

10 Kg. (Approx)

 

   
For exclusive range of Microscopes click microscopesmanufacturer.com
 
HomeProductsAbout usEnquiryContact usResources Bookmark
Copyright © Cosmo Laboratory Equipment. All Right Reserved.
Subscribe to my feedSubscribe to RSS Feed
 
Skype Me!
Click on the icon above to chat with us. Download Skype from SKYPE.COM